iFly737NG-FSX-SP1 Released
3 participantes
Página 1 de 1
iFly737NG-FSX-SP1 Released
Fix List:
Only the items listed are included, if an item you were concerned about is not mentioned then it is not included in the SP and will be added to the Feature Pack. Please do not post about any items not on this list, save those post for the development forum.
1. Update the MCP altitude acquisition/deviation alert logic. 1). Alt alert sound should have a 3sec delay(not 5 sec); 2). In level flight, the alert triggered is also the steady white acquisition alert and not the flashing amber deviation alert.
2. Displays CMD as soon as the second AP is engaged. The CMD should display until the second autopilot really engages (below 1500ft AGL - appearance of FLARE armed in white)
3. CDU CLR key can't be controlled by hotkey
4. Re-check the VNAV logic.
5. Sometimes, "LVL change 400fpm for short climb/descent" does not work.
6. Use 3 seperate altimeters for captain/fo/standby panel. Add ALT DISAGREE alert, display when capt/fo altitude disagree more than 200ft and more than 5 second.
7. Standby altimeter with altitude error.
8. Clicking on 2500FT, 200FT or 20FT at SIMU Menu--Style page does not open the corresponding menu but redirects you to the previous option you opened.
9. The cabin may still pressurizes even with both packs are all off
10.If in vc mode and there is no tower view available and select tower view from fs menu, then back to vc mode, all screens will blank until press "F9" or use "S" to re-select vc.
11.Two independent turnoff lights
12.FMC does not calculate T/D if there is no runway in the route
13.Update the APU FF logic.
14.Add lights test switch
15.If open simconnect log mode, there will be many exception error in log file.
16.Update the model
17.Add more options in the style menu.
18. The strange characters on the N1 limit page are back, this occurs when i load the "normal" panel state.
19. Spelling mistake on the lights test panel.
20. No automatic auto-thrust reduction if automatic thrust reduction selected.
21. IRS alignment time option works incorrectly.
22. Brake temp sensor is not correctly modelled.
23. If N1 set knob is not at AUTO mode, the N1 may excess the limit.
24. Change the cabin altitude logic, if loss bleedair/pack, the system use about 1500~1800vs to loss pressure.
25. Update the gear brake cooling rates
26. Change the N1 limit logic. A) With AT ON, N1 will not exceed green N1 limit. B) With AT OFF and EEC in normal, N1 will not exceed amber N1 limit. C) With AT OFF and EEC in ALTN, N1 can exceed amber N1 limit. D) The manually set N1 value has no effect on AT operation
27. GPWS provides height callouts based on the altitude set by the Captain's Minimums selector.
28. Re-build the logic for A/T engage/disengage, during VNAV PTH
29. When FD takeoff mode and cross thrust reduction altitude, and with auto thrust reduction mode ON, the A/T should engaged from ARM to N1, while N1 switch at MCP not light up.
30. DECEL point also available for way-point speed constraint.
31. Modify Approach Logic
32. Re-build G/A logic
33. GPWS sensitivity readjusted
VC Mouse Issue
Despite support from other developers we have not been able to fix the VC Mouse issue. Using a external frame rate limiter does improve things on pc's with the issue but does not prevent it. We have managed to squeeze some more frame rates from the aircraft and the testers are seeing approximately 15% improvement. While this does not seem much on low spec systems it does make things visibly smoother which is the aim at the end of the day for the aircraft to run smoothly and not being fixated on frame rates. A good example of this was on my top machine the external model runs over 120FPS but that creates a stutter until you limit the frames. With the frame per second limited it then becomes smooth as silk.
I am pleased to announce that the link for the IFLY 737 FSX SERVICE PACK 1 is as below:-
The List of what has been fixed/updated/added can be found here:-
http://ifly.flight1.net/forums/forum_posts.asp?TID=4727&title=fsx-sp1-details
Remember to install using the usual install method as laid out below:-
If using WINDOWS 7 Ensure that WINDOWS UAC is turned OFF
Ensure that your Anti Virus is disabled before you download and install
Ensure that you RIGHT CLICK on the installer and select RUN AS ADMINISTRATOR.
RESTART your computer after installing Service Pack 1.
The installer should not affect any of your previously installed repaints, but I would suggest that before you install, you back up your aircraft.cfg files.
Remember to LOAD the aircraft using the CONFIGURATION MANAGER before you fly..
É pessoal..vai ficar melhor ainda....
Only the items listed are included, if an item you were concerned about is not mentioned then it is not included in the SP and will be added to the Feature Pack. Please do not post about any items not on this list, save those post for the development forum.
1. Update the MCP altitude acquisition/deviation alert logic. 1). Alt alert sound should have a 3sec delay(not 5 sec); 2). In level flight, the alert triggered is also the steady white acquisition alert and not the flashing amber deviation alert.
2. Displays CMD as soon as the second AP is engaged. The CMD should display until the second autopilot really engages (below 1500ft AGL - appearance of FLARE armed in white)
3. CDU CLR key can't be controlled by hotkey
4. Re-check the VNAV logic.
5. Sometimes, "LVL change 400fpm for short climb/descent" does not work.
6. Use 3 seperate altimeters for captain/fo/standby panel. Add ALT DISAGREE alert, display when capt/fo altitude disagree more than 200ft and more than 5 second.
7. Standby altimeter with altitude error.
8. Clicking on 2500FT, 200FT or 20FT at SIMU Menu--Style page does not open the corresponding menu but redirects you to the previous option you opened.
9. The cabin may still pressurizes even with both packs are all off
10.If in vc mode and there is no tower view available and select tower view from fs menu, then back to vc mode, all screens will blank until press "F9" or use "S" to re-select vc.
11.Two independent turnoff lights
12.FMC does not calculate T/D if there is no runway in the route
13.Update the APU FF logic.
14.Add lights test switch
15.If open simconnect log mode, there will be many exception error in log file.
16.Update the model
17.Add more options in the style menu.
18. The strange characters on the N1 limit page are back, this occurs when i load the "normal" panel state.
19. Spelling mistake on the lights test panel.
20. No automatic auto-thrust reduction if automatic thrust reduction selected.
21. IRS alignment time option works incorrectly.
22. Brake temp sensor is not correctly modelled.
23. If N1 set knob is not at AUTO mode, the N1 may excess the limit.
24. Change the cabin altitude logic, if loss bleedair/pack, the system use about 1500~1800vs to loss pressure.
25. Update the gear brake cooling rates
26. Change the N1 limit logic. A) With AT ON, N1 will not exceed green N1 limit. B) With AT OFF and EEC in normal, N1 will not exceed amber N1 limit. C) With AT OFF and EEC in ALTN, N1 can exceed amber N1 limit. D) The manually set N1 value has no effect on AT operation
27. GPWS provides height callouts based on the altitude set by the Captain's Minimums selector.
28. Re-build the logic for A/T engage/disengage, during VNAV PTH
29. When FD takeoff mode and cross thrust reduction altitude, and with auto thrust reduction mode ON, the A/T should engaged from ARM to N1, while N1 switch at MCP not light up.
30. DECEL point also available for way-point speed constraint.
31. Modify Approach Logic
32. Re-build G/A logic
33. GPWS sensitivity readjusted
VC Mouse Issue
Despite support from other developers we have not been able to fix the VC Mouse issue. Using a external frame rate limiter does improve things on pc's with the issue but does not prevent it. We have managed to squeeze some more frame rates from the aircraft and the testers are seeing approximately 15% improvement. While this does not seem much on low spec systems it does make things visibly smoother which is the aim at the end of the day for the aircraft to run smoothly and not being fixated on frame rates. A good example of this was on my top machine the external model runs over 120FPS but that creates a stutter until you limit the frames. With the frame per second limited it then becomes smooth as silk.
I am pleased to announce that the link for the IFLY 737 FSX SERVICE PACK 1 is as below:-
The List of what has been fixed/updated/added can be found here:-
http://ifly.flight1.net/forums/forum_posts.asp?TID=4727&title=fsx-sp1-details
Remember to install using the usual install method as laid out below:-
If using WINDOWS 7 Ensure that WINDOWS UAC is turned OFF
Ensure that your Anti Virus is disabled before you download and install
Ensure that you RIGHT CLICK on the installer and select RUN AS ADMINISTRATOR.
RESTART your computer after installing Service Pack 1.
The installer should not affect any of your previously installed repaints, but I would suggest that before you install, you back up your aircraft.cfg files.
Remember to LOAD the aircraft using the CONFIGURATION MANAGER before you fly..
É pessoal..vai ficar melhor ainda....
Última edição por Graziani em Ter 19 Jul 2011, 21:30, editado 1 vez(es)
_________________
_________________
Mauricio Graziani
I5 6600 /EVga GTX 970/Gigabyte B-150 D3H/ Kingston Fury 2x4GB/2HD X 500GB Samsung /SSD 240GB SAMDisk/Coursair CX 500w/Saitek Yoke/MCP PRO GoFLight /Throttle/Pedal GS/Cockpit IOCards (/EFIS/Flaps)+SIOC Radio Saitek
Graziani- Tenente-Coronel
-
Inscrito em : 28/02/2011
Mensagens : 582
Reputação : 58
Idade : 64
Simulador preferido : P3D V4.5, X-Pla
Emprego/lazer : Project Manager
Nacionalidade :
Re: iFly737NG-FSX-SP1 Released
Ou seja, o problema que atinge 8 em cada 10 usuários ainda não foi resolvido...
Mas é bom saber que eles estão cientes do problema e estão trabalhando para resolver.
Mas é bom saber que eles estão cientes do problema e estão trabalhando para resolver.
_________________
Apenas minha opinião de bosta...
Re: iFly737NG-FSX-SP1 Released
É verdade Rhodes.. bom saber que sabem..mas é ruim saber que não resolveram !!!
_________________
_________________
Mauricio Graziani
I5 6600 /EVga GTX 970/Gigabyte B-150 D3H/ Kingston Fury 2x4GB/2HD X 500GB Samsung /SSD 240GB SAMDisk/Coursair CX 500w/Saitek Yoke/MCP PRO GoFLight /Throttle/Pedal GS/Cockpit IOCards (/EFIS/Flaps)+SIOC Radio Saitek
Graziani- Tenente-Coronel
-
Inscrito em : 28/02/2011
Mensagens : 582
Reputação : 58
Idade : 64
Simulador preferido : P3D V4.5, X-Pla
Emprego/lazer : Project Manager
Nacionalidade :
Re: iFly737NG-FSX-SP1 Released
rhodesbauer escreveu:Ou seja, o problema que atinge 8 em cada 10 usuários ainda não foi resolvido...
_________________
A vantagem da honestidade é que a concorrência é pequena.
andre_sp- Moderador
-
Inscrito em : 26/08/2009
Mensagens : 12018
Reputação : 1270
Idade : 55
Simulador preferido : FSX
Emprego/lazer : Aviação
Nacionalidade :
Tópicos semelhantes
» FTX Scotland Released
» New version released (1.3)
» QW AVRO for FSX Released!
» New MV-22B Osprey is released
» PMDG 777 SP1c Released!
» New version released (1.3)
» QW AVRO for FSX Released!
» New MV-22B Osprey is released
» PMDG 777 SP1c Released!
Página 1 de 1
Permissões neste sub-fórum
Não podes responder a tópicos